MAMMO LORAD III ERROR
September 10, 2019 11:56
Hello dears. I have a flaw in a Lorad III who could help me. The device presents a constant alarm at the initialization start that indicates high voltage on the panel. And verify the operation of the isolation transformer and I have voltages in the microprocessor and memory control cards (control). However, there is a short in a fuse called F2 of 5 Amp. Someone could help me in this fault please.
to rate and post a comment
re: MAMMO LORAD III ERROR
September 12, 2019 09:00
Hello, if you need copies of the service manual I m able to send you.
September 12, 2019 09:01
Can you explain in more detail the failure of the MIII?