Konica Regius 110 Moving Damage - 服务技术员 论坛

Konica Regius 110 moving damage

(23)
(1)
(6)

Glenn R. Hammerquist

Konica Regius 110 moving damage

May 19, 2020 10:35

Can moving a Konica Regius 110 without locking the carriage in place cause damage to the Optical Unit?
Thanks, Glenn

Log inor Register

to rate and post a comment

(2)

Wildman901

re: Konica Regius 110 moving damage

May 20, 2020 10:23

Yes, there’s always a chance. Just bring it forward and lock it into place, like you would if you were cleaning the optics, If you’re just moving it within the department, going gently over the bumps.
If you are transporting it to another facility etc., I would put the shipping brackets on.

Log inor Register

to rate and post a comment

(23)
(1)
(6)

Glenn R. Hammerquist

re: re: Konica Regius 110 moving damage

May 21, 2020 10:37

The facility moved it over a tube stand rail without locking it in place and now they have a 06650 error

Log inor Register

to rate and post a comment

(357)
(72)
(2)

juan pablo amado

re: re: re: Konica Regius 110 moving damage

May 26, 2020 10:48

06650 FPGA error (failure on event
driver access)
Failed on event driver access.
Confirm the following when it recurs.
1. Replace only the CIU and confirm the
operation.
(Especially around the high-speed serial
cable)
2. After backuping the circuit board data,
replace both CIU and CF card, restore the
circuit board data, and confirm the
operation.

Log inor Register

to rate and post a comment

Repairs for less with FREE Transducer EVALS! CALL NOW 1-888-838-7488

If you have a broken or defective probe, why not attempt to repair before purchasing? This could save you $1,000’s! With a free evaluation we can let you know the cost of repair if applicable. Call today: 1-888-838-7488 Email: sales@sentinelimaging.net

DOTmed Certified

 

Hitachi

 

RSTI Newsletter