dismiss

Our Clean Sweep Live Auction is coming up fast! Next Tuesday, September 26th at 9:30AM EST

SEARCH
当前地点:
>
>
> 9800 plus c-arm

9800 plus c-arm

(14)
(1)

kev

9800 plus c-arm

July 14, 2017 01:29

have a blank left screen, when video cable disconnected says no connection on screen, monitor is on , any advice on why I have nothing on screen, the power supplies check out , have a 7f on video controller showing , shows 5 arrows on boot up on c and stops at 5

Log inor Register

to rate and post a comment

(1)

Raymond Coombs

re: 9800 plus c-arm

July 15, 2017 09:18

check all you fuses on the right (looking from the rear), sounds like you dont have power to the CPU or 4 of the left boards, if you dont have lights on the left half of the rear boards its most likely a fuse

Log inor Register

to rate and post a comment

(24)
(3)

Jesse

re: 9800 plus c-arm

July 15, 2017 09:33

5 Arrows is a loss of connection from monitor cart to generator. Check your interconnect cable. most common is the pins on the cable or the cables inside the connector are broken.

Log inor Register

to rate and post a comment

Sterilization Equipment Specialists - Click to Shop or Call 877-561-0500

Our Mission: To be the most trusted resource in the sterilization market, dedicated to the advancement of our employees, clients, & suppliers. Our Focus: New & Refurbished Sterilizers & Autoclaves. TRADE-INS WELCOMED! DOTmed Certified DOTmed 100

 

 

 

对这个站点的通入和用途是受期限和条件我们支配 法律公告 & 保密性通知
物产和业主对 DOTmed.com,公司 Copyright ©2001-2017 DOTmed.com, Inc.
版权所有