Olympus Medivator DSD-201D
Dual Automated Endoscope Reprocessor Washer & Fume Control Unit
Purchase instantly by clicking the Buy Now button above. I will invoice freight shipping separately.
This dual station scope washer and fume removal unit was manufactured by Mintech/Medivators for Olympus. It is pre-owned and looks complete. It does power on and responds to buttons being pushed but complete testing has not been done.
There is an audible alarm sounding but I believe this is caused because the unit isnt properly connected to a water source. I can hear the internal pump working when I push the "Chemical loading Switch" and I dont see anything missing. The LCD display has a small blemish in the middle of the screen but it doesnt affect anything (see pic). Both drain manifolds are firmly attached and not broken loose. There is a compartment for a printer but I dont believe this particular unit ever had a printer installed. No other testing has been done. What you see is exactly what you get here.
I am certain it is working or can be made to work condition. Comes with both basin lids, scope connectors and fume removal unit. It looks really easy to install and only requires a water line, drain line and 120 volt outlet. I have added the manufacturer’s description below.
On the pallet this unit weighs about 450 lbs so it will definitely require freight shipping. I am open to all shipping options. To give you some idea it will cost approximately $160.00 for West coast shipping and approximately $350.00 for East Coast shipping. Contact me with your delivery address for an exact quote.
Mintech - Olympus
Medivator Endoscope Reprocessor
Serial No: 600625
Fume Removal Unit w/ Filter
Hospital grade cord and plug
120 Volts – 60 Hz – 12 Amps
The DSD-201 is similar in design to the earlier DSD-91E. All of the features of the DSD-91E are included on the DSD-201 along with additional enhancements. These features include faster cycle times, automated self-disinfection and sterilization, automatic log print at end of cycle with option to print on demand, continuous cycle and batch counts, self-priming LCG pumps, and LCG temperature monitoring and display. In addition, options such as automated endoscope leak testing, vapor management systems, lid locks to eliminate operator access to loads and a re-circulating wash to optimize scope cleanliness are available.
Two independently-controlled, asynchronus reprocessing stations
· Programmable cycle times
Automated self-disinfection minimizes recontamination of scopes
Internal water line sterilization optimizes rinse water quality
Floating lid design creates unique vapor containment for operator safety
Automated LCG loading/unloading limits vapor exposure
Comprehensive cycle parameter warnings ensure LCG viability
Log printout provides documented quality assurance
Optional lid locks improve operator safety
Optional recirculating wash provides added assurance of endoscope cleanliness
Optional automatic endoscope leak testing assures endoscope integrity
Good cosmetic condition with some normal sign of previous use and no visible problems. I don’t see anything missing or broken. I plugged it in and turned it on and the keypad is responding to buttons being pushed. The correct time and date are on the display. I can hear the internal pumps running when I turn it on. The LCD display has a small blemish in the center that doesnt affect use. One of the internal lids has a small crack. Both drain manifolds are firmly attached and not broken loose. No other testing has been done. The filter in the fume removal unit looks good with very little visible debris. The lift cylinders on both lids work to hold the lids open. I believe this device is in working or can be made to work condition. I am certain it will most likely have to be professionally serviced and installed before it can be used.
As always, I stand behind everything I sell and I guarantee this endoscope reprocessor is exact to the pictures and description I have provided here or return it for a full refund of the purchase price.
48” tall x 36” wide x 22” front to back (29" with Fume Removal Unit Attached)
Weight is about 380 lbs for everything pictured. I do not charge handling fees.
Palletized weight is 450 lbs. Pallet dimensions are 48" x 40" x 56" tall. The freight class is 100. The NMFC is 120940-1 "Sterilizer".
Pickup is welcome. This machine is located in Coolidge Arizona 85228 which is about 40 miles SE of Phoenix Arizona near I-10.
US and Canada- I have activated the freight calculator to figure the exact shipping to your location or you can arrange your own shipping. I can have it palletized and ready for pickup anytime.
International shipping will be EXPENSIVE but it is doable. International buyers may arrange your own shipping or contact me prior to buying for an international shipping quote. I can have it palletized and ready for pickup at any time.