Over 2350 Total Lots Up For Auction at Four Locations - NJ Cleansweep 09/29, TX 09/30, FL 10/06, NY 10/07

Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129
Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129 Listing 3053129

出售 HILL-ROM LIKO Golvo 7007 versatile vertical Patient Lift

  • Asking Price :$1,250.00 USD
  • Condition : Used - Good
  • Est. Shipping(US) : $0.01 USD
  • Qty. Available : 1
  • In Stock : Yes
  • Date : September 21, 2022
  • credit-card
  • credit-card
  • credit-card
  • credit-card

Item Description

Seller assumes all responsibility for this listing.

Listing: #3053129

  • Condition: Used - Good
  • Brand: HILL-ROM
  • Type: Patient Lift
  • Model: LIKO Golvo 7007 versatile vertical
  • MPN: 7007ES
  • Height: 4 inches
  • Power Supply Voltage: 24 VDC battery charged by 115 VAC built in wall charger
  • S/N: 7721426
  • Width: 288 inches
  • Warranty: 14 day inspection
  • Hydraulic: No
  • Under bed clearance: 3.5 inches
  • Vertical Lift Range: 23-73 inches
  • Weight Capacity: 440 ounds
  • Wheels/wheel Lock: 4 x 3' twin wheels. Rear wheels lock
FREE SHIPPING to most accessible locations in the USA and Canada

The European made Golvo model 7007 ES is much the same as the current 9009 model. Both are fully powered lifts, use the same type of batteries and remote controls and lift straight up using a ribbon cable instead of a a lifting arm. The 9009 models add a lift count display to the battery condition display included on the 7007 ES. The 9009 also has an optional ultra low wheel height kit, but the 3" wheels on the 7007 are sufficiently lower for most lifting situations. The technology used in the Golvo vertical floor lifts has remained virtually unchanged for 25 years because it works while also allowing the lift to be very versatile. This lift is suitable for most institutional and clinical lift applications as well as use in private homes without the hassle, limits and expense of installing overhead tracking. Of all the lifts I have sold, the Golvo 7007 series is the one I believe provides the highest quality, greatest versatility and best value in the used floor lift market.

The lift pictured here has very few signs of use and works exactly the way it was designed to. It has been inspected and tested and no issues of any kind are evident. A matching sling may be available, but sizing should be determined by someone trained in patient lifts such as an Occupational Therapist. Locally I offer a 90 day warranty on lifts of the quality. I would be more than happy to do so for lifts bought in other locations, however the cost of getting to and from a service call prohibits this. All of my lifts come with an inspection warranty which allows the users to confirm they are in good working condition upon arrival.

The Golvo 7007 ES is designed to allow disabled persons access to activities in their homes which might otherwise not be accessible. In its stabdard configuration this lift can be used to do full bed to chair, chair to bed, chair to commode or toilet lifts and, with a special harness, patient gait rehabilitation. With accessories available from LIKO it can also be used for sit to stand lift and horizontal lifts (e.g. bed to table).
Included are the lift with a wired remote control and a strong battery module with charger
Lifting speed: Two speed levels: 4.8 cm/s (1.9 inch./s) and 3.2 cm/s (1.3 inch./s); both speed levels without load.
Batteries: Two 2.9 Ah, 12 V, valve-regulated lead-acid gel type batteries.
Built-in charger for 100-240 V AC, charger: 50-60 Hz, max 400 mA.
Lift motor: 24 V, 6.5 A. Manufactured by Liko with planetary gearing and safety nut (prevents excessive wear).
Motor for width adjustment: 24 V, 3.5 A. Geared motor.
Wheels: Standard front: 4" / 75mm twin wheels. Standard rear: 4" 75 mm lockable twin wheels.
Material: Anodized aluminium.
Wheel Diameter: 4"/75 mm
Maximum Load: 200 Kilos / 440 pounds
Maximum Lift Bar Height: 1850 mm / 73"
Maximum Height of the Lift (to top when extended): 2080 mm / 82"
Minimum Height of Lift (top) : 1440 mm / 57"
Minimum Height of Lift Bar: 580 / 23"
Height of Support Rail When Used: 940 mm / 37"
Width of Support Rails When Used: 600 mm / 24"
Rolling Base Minimum Width: 750 mm / 30"
Rolling Base Maximum Width: 1020 mm / 40"
Weight of the Lift Empty: 44 kilos /97 pounds

"FREE SHIPPING" is conditional on the delivery address having access to a loading dock or forklift for offloading the lift. If this is not available the buyer may pick the lift up at a regional freight depot or pay an additional $80-$130 power tailgate offloading fees charged by the freight companies for curbside delivery. The mast will be removed from the base of the lift for shipping. Reassembly involved remounting it using a few nuts and bolts and plugging the power module into the lift. No special tools or knowledge is required. The lift can be shipped assembled, but extra charges may be incurred.

US buyers will not pay any taxes or tariffs, border related fees or even handling charges. What is paid on check out is all that will be paid.

Canadian buyers will be required to pay Federal GST tax at 5%. No provincial taxes or handling charges will be applied. Buyers in Canada should request an invoice in Canadian funds rather than use the Buy Now option.

Buyers in other locations should write for an estimate of shipping charges in advance of their purchase.


Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The buyer is purchasing an item(s) which may have been used for medical purposes and may have the potential to again be used for this purpose, however unless otherwise specified, at the time of sale the item is not considered to be bio-medically certified for use in any jurisdiction. The purchased item(s) is simply a device which operates in the limited manner described in the listing and/or electronic and mechanical components.

The purchaser agrees that the seller shall not be held responsible or liable:

* for any injuries or damages, whether incidental or consequential, associated in any way with the equipment;

* for compliance with regulations on ownership or use of the purchased item within the jurisdiction in which the purchaser resides and/or uses the item.

The purchaser, by buying this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer.

The sale of this item may be subject to regulation by Health Canada, the U.S. Food and Drug Administration and other national/provincial/territorial/state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to Health Canada or FDA regulation and it is to be used for regulated medical services in the Canada or the USA, your payment for it indicates you are an authorized purchaser and will comply with these regulations. If you have questions about legal obligations regarding sales of medical devices, you should consult with Health Canada, the FDA or the regulatory authority

Return Policy

If you find the item is not as described in the ad it may be returned for a purchase price refund. Generally, all of our items have an inspection warranty which kicks in upon delivery for a period of 7 to 14 days. It is not an operational warranty as most items sold on DOTmed require biomedical certification before use. If you require additional coverage please contact us prior to purchase.
Seller Information
Raynor Shine Ent
Shop with confidence
Chat with the Owner

We're Offline

Send message to seller