2012 Olympus OER-Pro Endoscope Reprocessor System
~ Ultrasonic Cleaner ~ 2 Scope Simultaneously in 26-29 min ~ Original Instruction Manual ~ Tubing & Scope Connectors ~
Purchase instantly by clicking the Buy Now button above. I will invoice freight shipping separately.
This Olympus OER-Pro Endoscope Reprocessor System was first installed on March 29, 2012 according to the label on the front. The last Olympus service was conducted on March 13, 2017 so it hasn't been long since this sytem was in service. As near as I can tell it is complete and I dont see anything obviously missing or wrong with it. I did plug it in and it powers on, lights up and looks ready to use. No other testing has been done but I do guarantee it will not be DOA. I am certain it is either working or can be made to work by someone qualified. The PM light is on so I am certain it is due for new filters and preventative maintenance service.
Comes with the OER-Pro Flexible Endoscope Reprocessor w/ Ultasonic Cleaner, Endoscope connectors & tubing, internal rack, external scope holder, built in printer, Water supply line, drain line and gas filters. This system can process 2 flexible endoscopes simultaneously in 26-29 minutes. Has the RFID feature that automatically records scope model and serial numbers for tracking. The basin is 3.7 gallon stainless steel and the hinged lid is clear to clearly observe the reprocessing cycle. Uses Acecide-C or Aldahol 1.8 disinfectant solutions with an alcohol flush.
Olympus Dual Flexible Endoscope Reprocessor System
Serial No: 2110501
Original Installation March 29, 2012
Last Olympus Inspection March 13, 2017 (Good until 3/18)
120V - 60Hz - 5.5A
Total LCG loads: 583
Total Cycles: 10,070
Internal Rack w/ Scope connectors & tubing
(2) Gas filters
2 Supply line, drain line, power cord
Removeable Scope holder
Uses Acecide-C or Aldahol 1.8 Disinfectant solutions
The only reprocessor designed by an endoscope manufacturer. With its combined expertise, knowledge, and experience, Olympus has developed a dual-scope reprocessor designed to assure the best-possible reprocessing outcome for your Olympus flexible endoscopes. The OER-Pro assures optimal compatibility between scopes, reprocessor, and chemistry.
Easier, Faster, and Reliable
Quick Reprocessing Time
Simultaneous reprocessing of two flexible scopes in about 29 minutes, or one scope at a time, including Olympus ultrasonic scopes and other specialty models.
Compact and Smart Design
Simple configuration in a compact 18"-wide design, half the size of earlier reprocessors, helps ease operation and installation, while minimizing space requirements. Also equipped with casters for increased mobility and accessibility.
Modified Manual Cleaning
Easier and faster cleaning process, which eliminates 7 of the 11 manual cleaning steps including the most labor-intensive and variable part of the process, manual flushing of the endoscope channels with detergent, water, and air.
Automated Scope ID System
Equipped with a simple-to-use Radio Frequency Indentification (RFID) management system, which provides automated traceability of the scope serial and model numbers, operator, and time of reprocessing to eliminate cumbersome manual input from a keypad or barcode.
This endoscope reprocessor system is in excellent cosmetic and power tested condition. The last Olympus inspection was performed in March 2017 and was good until 3/2018. Everything looks intact and nothing is visibly missing or broken. I plug the machine in and it does power on and both control panels light up. I have not done any actual testing but I believe it will work or can easily be made to work by someone with more knowledge than me. The digital counter reads 10070 total cycles and 583 LCG loads. The filters are dated 2017. The PM light is blinking which I think is normal because I didnt have it hooked up to any supply lines and it has been two years since the filters were installed. The inside basin, tubing and connectors look new with no visible wear or damage. The transparent lid is nice without cracks or breaks and the footpedal lid release is working properly. The lid hydraulic cyclinder is working to hold the lid open properly. The instuction manual is original to the device. The supply and drain lines look good.
Original Installation occured on March 29, 2012
18" wide x 39" tall x 31" front to back
I stand behind everything I sell and I guarantee this Olympus OER-Pro is exact to the description and pictures I have provided here or return it for a refund.
This unit weighs 284 lbs and will require freight shipping. To give you some idea it will cost approximately $175.00 for west coast shipping and approximately $260.00 for east coast shipping. Lift gate service, residential delivery, limited access and inside delivery will cost extra if needed. Contact me with your shipping address for an exact quote.
Pallet weight will be 334 lbs, NMFC 179320-1 "Sterilizer Cabinet", Freight Class 100, Dimensions 40x24x45
Pickup is always welcome. located in Coolidge Arizona 85128 which is 40 miles SE of Phoenix Az near I-10
All other international buyers must contact me prior to purchasing for a shipping quote and determination whether this item will ship feasibly to your country. It is large/heavy and will be expensive to ship internationally.