GE Logiq 5 Pro - Black Screen after BIOS-Battery Change
Posted by an Anonymous User
GE Logiq 5 Pro - Black Screen after BIOS-Battery Change
February 18, 2020 09:47
As mentioned in the title, I changed the BIOS-Battery because of low voltage and got black screens as a result.
The machine starts and all connectors are in place but there's no monitor output. I've read that the BIOS has to be recovered after
a battery change, but how can I do that?
GE Logiq 5 Pro - Black Screen after BIOS-Battery Change
February 18, 2020 09:47
As mentioned in the title, I changed the BIOS-Battery because of low voltage and got black screens as a result.
The machine starts and all connectors are in place but there's no monitor output. I've read that the BIOS has to be recovered after
a battery change, but how can I do that?
I hope someone has an idea.
Thanks.
to rate and post a comment
(1)
Macilio Patrocinio
re: GE Logiq 5 Pro - Black Screen after BIOS-Battery Change
March 09, 2020 09:19
Hello my friend!
I believe that replacing the battery would not cause the problem.
Try to clean the ram and processor.
but be cautious with these procedures.
Also check the video outputs.
to rate and post a comment