Anyone have the service manual/schematic for the Analogic AN8102 amplifier?I have a unit that has problem with high DC power error(no DC power at the start. Disconnected power lines from amp section, and still no high DC voltage (should be around 150VDC, I think)
Hi, let me know how I can contact you. I was able to force the high voltage to come up by enabling a pin, so I know the actual voltage section is fine. Replaced the microprocessor for possible corrupt firmware to no avail. RF pre/amp section seemed to be ok. Something is holding the high voltage down. Thanks
Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and send them to me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927
Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and share them with me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927
The Anagogic RFPA is a uP based system, any inner fault will result into FAULT status. You need to solve the fault(s) and possibly need to re-calibrate the system via necessary procedure by software. I don't think you can fix the fault simply replacing a component. We have the necessary facilities and skills. frank_qiao@hotmail.com
Titanium Medical Imaging, specializing in Toshiba/Canon Equipment Sales, Parts, and Service. Parts are in stock and available for immediate delivery. In-Room MRI Upgrades available now. ph:713-640-5457 or kyle@titaniummed.com
(1)
Hyunsup Kim
analogic an8102 rf ampilfier
December 22, 2011 02:02
Anyone have the service manual/schematic for the Analogic AN8102 amplifier?I have a unit that has problem with high DC power error(no DC power at the start. Disconnected power lines from amp section, and still no high DC voltage (should be around 150VDC, I think)
to rate and post a comment
(19)
Mikhail Zakurdaew
Re: analogic an8102 rf ampilfier
December 23, 2011 09:43
Good day!
Check the MOS-FET transistor and circuitry in the power supply for the preamp. Diagrams and service manual I have.
Good luck!
to rate and post a comment
(1)
Hyunsup Kim
Re: analogic an8102 rf ampilfier
December 26, 2011 10:13
Hi, let me know how I can contact you. I was able to force the high voltage to come up by enabling a pin, so I know the actual voltage section is fine. Replaced the microprocessor for possible corrupt firmware to no avail. RF pre/amp section seemed to be ok. Something is holding the high voltage down. Thanks
to rate and post a comment
RAUL BIANCULLI
Re: analogic an8102 rf ampilfier
December 27, 2011 05:08
I am interested to get the AN8102 service manual.
raul_bianculli@netgate.com.uy
to rate and post a comment
majid yousefi
re: Re: analogic an8102 rf ampilfier
June 29, 2015 04:24
I need this too. I appreciate if you send it to me. parsimard@gmail.com
thanks
to rate and post a comment
(7)
Eugene Telles
Re: analogic an8102 rf ampilfier
February 08, 2012 11:35
Hello,
I am interested in getting the manual and diagrams. Please call me at 719-393-7373
Thanks. Gene
to rate and post a comment
Steve Kim
re: Re: analogic an8102 rf ampilfier
December 05, 2013 12:38
How do I contact you to get Analogic 8102/8103 rf amp manual and schmatic diagrams? Please advise me.
Regards,
Steve.
to rate and post a comment
(1)
David Doucet
re: Re: analogic an8102 rf ampilfier
December 10, 2013 01:17
Would it be possible to get a copy of the service manuals and schematics also? dave.doucet@dynamicimagingservice.com
to rate and post a comment
(1)
Jorge Balbiano
re: Re: analogic an8102 rf ampilfier
December 13, 2013 04:17
I'm also need service manual and schematics. Please contact me jorge_balbiano@yahoo.com
to rate and post a comment
egor dementev
re: Re: analogic an8102 rf ampilfier
January 26, 2015 08:09
there burned transistors on them number 21-514021 21-514020 and I can not find such than they can be replaced?
to rate and post a comment
majid yousefi
re: Re: analogic an8102 rf ampilfier
June 29, 2015 04:24
I appreciate if you send it to me.
parsimard@gmail.com
thanks
to rate and post a comment
Frank Qiao
re: re: Re: analogic an8102 rf ampilfier
August 02, 2017 08:05
We have the necessary facilities and skill on it. Any technical issue pls contact frank_qiao@hotmail.com
to rate and post a comment
(5)
Mike Manning
re: Re: analogic an8102 rf ampilfier
August 05, 2015 10:45
Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and send them to me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927
to rate and post a comment
Frank Qiao
re: re: Re: analogic an8102 rf ampilfier
August 02, 2017 08:05
We have the necessary facilities and skill on it. Any technical issue pls contact frank_qiao@hotmail.com
to rate and post a comment
(5)
Mike Manning
re: Re: analogic an8102 rf ampilfier
August 02, 2017 03:23
Like the others, I too need the service diagrams and manuals. Would you please be able to help me out and share them with me. Your help would be appreciated.
Mike Manning
manning-michael2@aramark.com
704-948-7927
to rate and post a comment
(1)
chalie alvarez
re: Re: analogic an8102 rf ampilfier
July 18, 2019 09:10
can I have a copy of the service manual and schematics please
to rate and post a comment
(1)
Mauro Neves
re: Re: analogic an8102 rf ampilfier
July 19, 2019 10:26
Hi Mikhail!
Can I have the service manual of AN8102 from you?
My e-mail is mauro.neves@hotmail.com.
Thank you
to rate and post a comment
Frank Qiao
re: analogic an8102 rf ampilfier
August 02, 2017 08:05
The Anagogic RFPA is a uP based system, any inner fault will result into FAULT status. You need to solve the fault(s) and possibly need to re-calibrate the system via necessary procedure by software. I don't think you can fix the fault simply replacing a component. We have the necessary facilities and skills. frank_qiao@hotmail.com
to rate and post a comment