Sony introduces a new medical LCD monitor - the LMD-2110MD - which complies with medical safety standards and EMC standards while maintaining an excellent cost: performance ratio. Equipped with a 21.5-inch* full-HD (1920 x 1080 pixels) high-resolution LCD panel, the LMD-2110MD delivers crisp high-definition (HD) images. Combined with a 10-bit digital signal processing system, this monitor offers stunning and smooth grayscale.

The LMD-2110MD is equipped with a conventional versatile analog input interfaces and an HDMI input, which can accept HD signals up to 1080 / 60p. In addition, this monitor can input HD/SD-SDI signals using the optional BKM-341HS input adaptor. These features and benefits make this monitor a perfect cost-effective choice for a wide range of applications in healthcare settings.
Features

Saftey Listing and Compliance

The LMD-2110MD is UL60601-1 -listed and complies with CSA C22.2 No.601-1 and EN 60601-1 saftey standards and EMC standards, making it suitable for use in a wide range of professional medical applications.

21.5-inch Full-HD (1920 x 1080 pixels) Resolution, 10-bit Signal Processing

Incorporating precisely manufactured high-purity RGB color filters and a high-speed response LCD panel, the LMD-2110MD delivers accurate color reproduction and stunningly lifelike crisp images. All SD and HD input signals are converted into 10-bit digital signals without any picture deterioration via full digital imaging circuitry. This 10-bit signal processing achieves significant signal-to-noise ratio (SNR) improvement and smooth grayscale compared to 8-bit data processing.

Wide Range of Standard Input Interfaces

The LMD-2110MD is equipped with a full range of analog inputs including a composite, Y/C (S-Video), analog component, and RGB. Also included is an HDMI, which can accept HD digital signals up to 1080/50p and 60p. DVI signals can be input via the HDMI input connector using a conversion cable.

Optional HD-SDI Interface

In addition, this monitor supports HD-SDI input with an optional BKM-341HS HD/SD-SDI input adaptor. This input versatility allows the LMD-2110MD monitor to flexibly connect to HD-SDI digital environments.

Compact Design - Portable and Flexible

Unlike CRT monitors, terrestrial magnetic fields have no influence on LCD monitors. This means the LMD-2110MD can be carried and used in any position andn location. With the standard monitor stand, users can set the monitor anywhere and use it immediately. The LMD-2110MD provides VESA-standard mounting holes with 100 mm pitch, and is flexible enough to install with a VESA arm and on a medical cart.

Other Features

Conventional functions, including Contrast, Brightness, Chroma, Phase control, and Color temperature setting.
Menu screen with seven selectable languages
Scan setting (Normal (0%), Over (5%0, Full Scan)
Standard monitor stand with tilt function
External parallel remote control

Specifications

Picture Performance

Type: a-Si TFT Active Matrix LCD
Resolution: 1920 x 1080 pixels (Full HD)
Effective picture size (H x W) (diagonal): 477 x 268 mm (18 7/8 x 10 5/8 inches), 547 mm (21 5/8 inches)
Aspect: 16:9
Colors: Approx. 16.7 million colors
Viewing angle (LCD panel specification): 170°/160° (typical) (horizontal/vertical contrast > 10:1)

Input

Composite: BNC (x1), 1.0 Vp-p ±3 dB sync negative
S-Video (Y/C): Mini DIN 4-pin (x1); Y: 1.0 Vp-p ±3 dB sync negative, C: 0.286 Vp-p ±3 dB (NTSC burst signal level), 0.3 Vp-p ±3 dB (PAL burst signal level)
RGB, Component: BNC (x3), RGB: 0.7 Vp-p ±3 dB (Sync On Green, 0.3 Vp-p sync negative), Component: 0.7 Vp-p ±3 dB, (75% chrominance standard color bar signal)
HDMI: HDMI (x1)
Audio: Phono jack (x2), -5 dBu 47 kilohms or higher, Option Audeo In: Phono jack (x1), -5 dBu 47 kilohms or higher
External sync: BNC (x1) 0.3 Vp-p to 4.0 Vp-p ±bipolarity ternary or negative polarity binary
Option in connector: D-sub 9-pin (x1), female
Parallel remote: Modular connector 8-pin (x1) (pin-assignable)

Output

Composite: BNC (x1), loop-through, with 75 ohms automatic termination
S-Video (Y/C): Mini DIN 4-pin (x1), loop-through, with 75 ohms automatic termination
RGB, Component: BNC (x3), loop-through, with 75 ohms automatic termination

External Sync: BNC (x1), loop-through, with 75 ohms automatic termination
Audio: Phono jack (x2), -5 dBu 47 kilohms or higher, Option Audeo In: Phono jack (x1), -5 dBu 47 kilohms or higher
External sync: BNC (x1) 0.3 Vp-p to 4.0 Vp-p ±bipolarity ternary or negative polarity binary
Audio monitor out: Phono jack (x2), loop-through
Speaker (built-in): 0.5W (mono)

General

Power requirements: AC 100 V to 240 V, 50/60 Hz
Power consumption: Maximum: approx. 60 W, 1.0 A to 0.5 A
Operating temperature: 0°C to 35°C (32°F to 95°F); Recommended: 20°C to 30°C (68°F to 86°F)
Operating humidity: 30% to 85% (no condensation)
Storage and transport temperature: -20°C to +60°C (-4°F to +140°F)
Storage and transport humidity: 0% to 90%
Operating, storage and transport pressure: 700 hPa to 1060 hPa
Dimensions (W x H x D) (with stand): 515 x 403 x 264 mm (20 3/8 x 15 7/8 x 10 1/2 inches)
Dimensions (W x H x D) (without stand): 515 x 355 x 86 mm (20 3/8 x 14 x 3 1/2 inches)
Mass: 8.6 kg (18 lb 15 oz)
Mass (without stand): 6.9 kg (14 lb 19 oz)
Supplied accessories: AC power cord (1), AC plug holder (2), Instructions for Use (1), CD-ROM (1), Using the CD-ROM Manual (1), Quick Reference (1), When you First Use the Monitor (1), Sales Companies Guide (1), Warranty book (1)