For Sale SLEEPSENSE Double Loop Piezo Crystal y Effort Sensor Respirator

The SleepSense Double Loop Piezo Crystal Respiratory Effort Sensor (#1387) with safety DIN connectors can be applied with any elastic-velcro band.

Warranty: 1 Year - Free of Defects in Materials and Quality Workmanship.

Using the piezo-electric crystal, the respiration effort sensor converts chest or abdominal respiration movement to a small analog voltage that provides a clear, reliable indication of respiration waveforms.

This device is for diagnostic purposes only and not for use as an apnea monitor.

NOTE: SleepSense items are for professional use only, and are for sale by or on the order of a physician only.

SleepSense Double Loop Piezo Crystal Respiratory Effort Sensor Features

• Sturdy mechanical design.
• Isolated element provides excellent immunity to environmental artifacts.
• Very strong and stable signal.
• Sensors individually calibrated for consistent sensitivity.
• Does not require a battery or interface.

SleepSense Double Loop Piezo Crystal Respiratory Effort Sensor Specifications

• Sensor Technology: Piezo crystal in ABS box.
• Typical Polygraph Settings:
  • Sensitivity: 100 to 300 μV/mm.
  • Low Frequency Filter: 0.1 Hz.
  • High Frequency Filter: 70 Hz.
• Typical Signal Amplitude:
  • Typical 1 mV peak to peak.
  • Signal amplitudes vary. Response is dependent on such variables as sensor position, strap tension, polygraph characteristics, etc.
• Physical Size: 3" (75 mm) side to side.
• Cable: White PVC insulation tinsel wire.
• Cable Length: Sensor: 6'7" (200 cm), 1.5 mm touch-proof connector.
• Weight: 3 oz (82 g).
• Operating Conditions: 40 to 104 °F (5 to 40 °C).
• Storage Temperature: -4 to 140 °F (-20 to 60 °C).
• Operating and Storage Humidity: 5 to 95% (non-condensing).

Return Policy

30 Day Return Policy. Free Return. Return Policy: https://help.mfimedical.com/en-US/return-policy-204649