FREE UPS shipping to the USA
These US made O2 analyzers appear in good condition and are warranted to pass a biomedical inspection on delivery. The analyzers being sold come with the rear clip and black sensor cable . One stand is available at $10 when purchased and sent with the analyzer. Please write if you write in advance of purchase if this interests you.
The MX300 medical oxygen analyzer is manufactured by Teledyne in . These instruments provide flexible and reliable performance in oxygen analyzing, using high-quality manufacturing techniques. These microprocessor-based monitor and analyzer are equipped with an LCD backlighting for easy viewing in low light conditions. These devices have RS-232 signal outputs for sharing data. They are also equipped with both audible and visual alarms for sensor disconnect. These models use a type R-17MED oxygen sensor, which has two patented improvements that offer enhanced temperature tracking. These sensors have a 36 month life, and are not included with this item. The MX300 is CE, CSA, health Canada and FDA approved.
The MX300-I is a portable instrument that provides fast and accurate oxygen monitoring and incorporates an audio/visual alarm capability. These instruments are designed to monitor up to 100% oxygen concentration in medical gas mixtures. Because they are microprocessor-based, the MX300-I instruments have a unique combination of features that make them very easy to use. The operator
interface is accomplished through a series of buttons located conveniently on the front face of the instrument. Oxygen analysis is linear across the single range of 0-100% using Teledyne’s class R17MED oxygen sensor. A unique sensor failure alarm is incorporated which warns the user if the sensor signal is lost or low. When this occurs, the √ SENSOR display flashes. The alarm buzzer can be silenced by pressing the ALARM SILENCE key. If the alarm condition is not corrected within 115 seconds the alarm buzzer will reactivate. The MX300-I unit incorporates a dual concentration alarm with
individual user-defined set points. The set points are displayed on the lower portion of the LCD display with the low alarm set point appearing at the lower left and the high alarm appearing on the lower right of the display. The alarm circuitry provides both an audible and visual alarm. The instrument is powered by three AA alkaline batteries and is designed to operate for 2000 hours in non-alarm state. The MX300-1 is CE, CSA, health Canada and FDA approved.
The MX300-I is a compact, versatile instrument capable of rapidly measuring the oxygen content of an atmosphere or environment accurately to ±2% over the range 0-100% oxygen. The following
features are standard on the MX300-I instruments:
• Large easy to read 3 1/2 digit LCD display (see options)
• Automatic LCD back lighting upon key press
• Microprocessor controlled
• Up/Down front panel controls
• Sensor fail/disconnect alarm indicator (audible and visual)
• Alarm silence button
• 2000 operating hours from 3 AA alkaline batteries
• Battery status indicator
• Stand for upright tabletop deployment
• Hardware for pole clamping and V block support
• Rugged high impact ABS construction
• Splash resistant case.
• Long life (36 months in air) class R17MED sensor
• 0-1 VDC digital output (optional RS-232)
• FDA approved and cleared for CSA/CE marking
• 2 User defined set point controlled concentration alarms
• Battery test function
MX300 Specifications:
Range: 0-100% oxygen
Accuracy: +2% of full scale (at constant temperature and pressure)
Response Time: 90% in less than 8 seconds at 25 °C
Battery Life: Approximately 2000 hr. continuous use in a non-alarm condition
System Power: 3 AA alkaline batteries.
Sensor Type: Class R17MED
Expected Life: 36 months in air. (10 months when
continuously exposed to 100% oxygen)
Dimensions: 2.5" W × 1.25" D × 4.5" H (66 mm x 33-mm × 111.5 mm)
Sensor Cable: Retracted: 2 ft / Extended: 10 ft.
Storage Temp. 10-30 °C (continuous), 5-50 °C (Intermittent)
Operating Temp: 0-40 °C
Alarm ranges: HI alarm: 19 to 100 Percent
LO alarm: 18 to 99 %
Alarm accuracy: Alarm thresholds are digitally stored and alarm affectivity is digitally compared against the value calculated by the microprocessor. Hence, the accuracy of the alarms is the same as the accuracy of the unit .
R-17MED Sensor Specifications
Output: (7-13mv) in air at 25°C sea level
Range: 0-100% O2 (max), 0-1% O2 (min)
Accuracy: Within ±1% of full scale at constant temperature and pressure
Response time: Less than 6 seconds to 90% of final value
Operating humidity: 0-99% RH (non-condensing)
Operating temp: 0-40°C (32-104°F)
Storage temp: 0-40°C (32-104°F)
Expected cell life: 36 months in air at 25°C and 50% RH
P/N: C43690-R17MED
US buyers will pay no taxes or tariffs of any kind (not Canadian or American). UPS delivery typically takes a week.
Canadians will require permission from Health Canada to legally purchase this item. It is probably simpler for Canadians to purchase one of these from an American supplier as a result.
Buyers in other locations should write in advance of purchase with the delivery address. An estimate for the cost of shipping will be provided in the response.
*************************************************
DISCLAIMER:
Regardless of the origin of the equipment, documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The buyer is purchasing an item(s) which may have been used for medical purposes and may have the potential to again be used for this purpose, however, unless otherwise specified, at the time of sale the item is not considered to be bio-medically certified for use in any jurisdiction. The purchased item(s) is simply a device which operates in the limited manner described in the listing and/or electronic and mechanical components.
The purchaser agrees that the seller shall not be held responsible or liable:
* for any injuries or damages, whether incidental or consequential, associated in any way with the equipment;
* for compliance with regulations on ownership or use of the purchased item within the jurisdiction in which the purchaser resides and/or uses the item.
The purchaser, by buying this equipment, indicates their acknowledgement of, and agreement to the terms of this disclaimer.
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and other national/provincial/territorial/state and local regulatory agencies. If so, do not buy this item unless you are an authorized purchaser. If the item is subject to Health Canada or FDA regulation and it is to be used for regulated medical services in the USA, your payment for it indicates you are an authorized purchaser and will comply with these regulations. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA or the regulatory authorities in the jurisdiction in which the item is to be used.
Return Policy
7 Day Return Policy. Customer must pay the return shipping costs when returning a product. If you find the item is not as described in the ad it may be returned for a purchase price refund. Generally, all of our items have an inspection warranty which kicks in upon delivery for a period of 7 to 14 days. It is not an operational warranty as most items sold on DOTmed require biomedical certification before use. If you require additional coverage please contact us prior to purchase.
67
