Meiji Trinocular Inverted Phase Micromanipulator Injection Microscope
Included - Inverrted microscope with lenses 10x,20x 40 x
Complete Micromanipulation system made in Japan OEM - with Pnemuatic or Air INjector
Hot PLate and Camera Optional
This Series are equipped with micromanipulators used to physically interact with a sample under a microscope, where a level of precision of movement is necessary that cannot be achieved by the unaided human hand. It consist of an input joystick, a mechanism for reducing the range of movement and an output section with the means of holding a microtool to hold, inject, cut or otherwise manipulate the object as required. The mechanism for reducing the movement is free of backlash. This is achieved by the use of kinematic constraints to allow each part of the mechanism to move only in one or more chosen degrees of freedom, which achieves a high precision and repeatability of movement, usually at the expense of some absolute accuracy.
Movement reduction can be performed by mechanical levers, hydraulically using pistons of different diameters connected by tubing containing non-compressible fluid, using combinations of techniques in one instrument. Mechanisms with different ranges of movement or variable reduction ratio may be incorporated in one instrument to allow coarse and fine positioning.
Depending on the application, users may require different scales of movement resolution, movement speed, range and accuracy. These are the critical variables integrated into manipulator designed by manufacturers, which are typically presented to suit particular applications.
MICROMANIPULATION
three-dimensional hydraulic micromanipulator is driving distance X / Y / Z axes 20mm and, smooth movement of the hydraulic and feature a. Pneumatic injector is unnecessary filling of oil yet, it achieved a response of more than oil formula was. It is with a push type air refill valve. The injection holder is equipped with a pipette stopper and a positioning stopper. The adapter part with the microscope is equipped with a bounce lever . By tilting the lever, the entire left and right driving part jumps up, and it is possible to easily exchange the capillary pipette and replace the sample. It is a high performance yet simple and easy to use injection system set. It adopts a special specification for the lens barrel of the inverted microscope and it is possible to observe an erect image, making it ideal for micromanipulation.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
