Dionex ED40 Electrochemical Detector Data Sheet
Environmental
Operating Temperature: 4 °C to 40 °C (40 °F to 104 °F)
Operating Humidity: 5 to 95% relative humidity, non-condensing
Physical
Dimensions: 22.5 cm wide x 17.0 cm high x 42.0 cm deep (8.8 in wide x 6.6 in high x
16.4 in deep) 6 cm (2.4 in) clearance required behind the detector
Weight: 8.2 kg (18 lb)
Display and Keypad
Display: Liquid crystal display with adjustable backlighting
Keypad: 26-button keypad for entering commands and numerical values for screen parameters
Detector
Range: 0.01 μS to 3000 μS, full scale (Conductivity)
50 pC to 200 μC (Integrated Amperometry)
50 pA to 300 μA (DC Amperometry)
Temperature Compensation: 0.0 to 3.0% per °C (Conductivity)
Cell Drive: Variable 8 kHz square wave (Conductivity)
±2.04 V (DC and Integrated Amperometry)
Local Operation: Front panel controls and display status of all functions.
Remote Operation: Control of 4 of 7 functions via TTL or Relay contacts.
DX LAN Operation: All functions controlled by PeakNet Software on a PC connected to the ED40 via the DX LAN interface (optional).
Conductivity Cell
Cell Body: PEEK
Active Volume: 1.0 Μl
Maximum Pressure: 2.0 mPa (300 psi)
Electrodes: 316 stainless steel
Amperometry Cell
Cell Body: Titanium (counterelectrode)
Active volume: ~ 0.2 μL
Maximum Pressure: 0.7 mPa (100 psi)
Working Electrodes: Gold, Silver, Platinum, Glassy Carbon
Reference Electrode: Combination pH–Ag/AgCl
SRS Power Supply
Supply Current: 50, 100, 300, 500 mA @ 1.5 to 7.5 V
Over-Voltage Alarm: 8.5 V
Over-Temperature Alarm: 40 °C
DS3 Detection Stabilizer
Operating Temperature: 25 °C to 40 °C (50 °F to 104 °F)
Warm-up Time: 10 minutes (typical)
Under- or Over-Temperature Alarms: Message displayed when not at set temperature displayed when not at set temperature
Good condition.
Recently de-installed from a working lab.
Please note: I have been unable to carry out any extensive tests as I do not have the software but it was working prior to de-installation from the laboratory. The system can be tested prior to the sale. Contact for more information.
Collection from London welcome.
Free delivery within the UK.
Can ship worldwide. Bank/Wire transfer accepted.
Return Policy
Items are sold as-is with no returns or refunds available unless explicitly stated.
