Seller assumes all responsibility for this listing..
Listing: #3367556
These micro transceivers are 10Base2 and 10T compliant transceivers designed to reduce Ethernet cabling costs. Compact size allows these transceivers to connect directly to the workstation, bringing thin Ethernet or Unshielded Twisted Pair (UTP) wiring directly to the workstation. With UTP and inexpensive coax network media, distances up to 100 meters between workstations can be supported using UTP, and up to 185 meters using coax.
The 10Base2 compliant AT-MX10S transceiver uses an industry-standard Ethernet transceiver chip that guarantees IEEE compliance. The 10T compliant AT-MX20T and AT-210TS transceivers are also guaranteed compliant by the use of standard ICs.
On all models Signal Quality Error (SQE)/Heartbeat test can easily be enabled or disabled via an externally accessible switch. Additionally, all models have integral jabber lock-up prevention circuitry and a loopback function. This function emulates coaxial media where transmitted packets are looped back to the receive side. Local Area Network (LAN) controllers can use the loopback feature to determine if a Media Attachment Unit (MAU) is connected and operational.
The AT-MX20T and AT-210TS transceivers incorporate other functions that offer improved network reliability for workstations. The 10T link integrity test function provides a continuous test of the connection to the multiport repeater.
A test pulse is periodically transmitted and expected at the companion transceivers receive side. If the pulse is not seen on the receive side, the transceiver is placed into link test fail mode. Normal operation of the transmit side is inhibited and the Link LED is turned off. Normal operation is resumed when the link is reestablished by the reception of a valid packet or two valid link pulses.
10T transceivers also address the polarity of the receive pair wiring. In less than one second, the UTP transceiver automatically rolls the wire pair and allows for the proper operation of the transceiver. Also, the Polarity indicator on the AT-210TS transceiver is not illuminated when the circuitry has transposed the receive pair.
SQE/Heartbeat test status is indicated by LEDs on the AT-MX10S, and AT-210TS transceivers. The AT-MX10S transceiver utilizes a two-colored LED that indicates the presence of Data Terminal Equipment (DTE) power in addition to the SQE test. The AT-210TS has a single LED that indicates the status of the SQE test switch.
Status Indicators
Power: Power is present from the DTE
Link: Indicates a valid link exists
SQE Test: SQE/Heartbeat test enabled
Polarity: Automatic polarity reversal has not occurred
POWER CHARACTERISTICS:
Isolation: Breakdown Voltage
AT-210TS: 1500v rms 50/60 Hz for 1 min
Supply:
Typical: Voltage 12v
Range: 11.4 to 12.6v
Current:
Typical: 300mA
Range: 500mA
PHYSICAL CHARACTERISTICS:
Dimensions: Standard: 6.4cm x 4.6cm x 2.0cm (2.5 x 1.8 x 0.8)
Slim-line: 6.9cm x 4.3cm x 2.5cm (2.7 x 1.7 x 1.0)
Weight: Standard: 70g (2.4oz) Slim-line 73g (2.5oz
** HABLAMOS ESPANOL
-Call or email with your questions
-We ship worldwide.
-Ship from: Southern California.
Payment Options
WE ACCEPT PAYPAL PAYMENTS, ALL MAJOR CREDIT CARDS (VISA / MASTER CARD / AMERICAN EXPRESS / DISCOVER), COMPANY, AND CASHIER'S CHECKS.
ANY ITEMS PURCHASED THROUGH CASHIER'S OR COMPANY CHECK WILL BE SHIPPED UNTIL CHECK IS CASHED IN.
Shipping Policy
WILL SHIP USPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. EXPEDITED SHIPPING AVAILABLE THROUGH UPS.
THE BUYER IS RESPONSIBLE FOR ALL SHIPPING & HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. INTERNATIONAL SHIPPING AVAILABLE
SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED.
ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. ALL TAXES AND DUTIES ARE BUYER RESPONSABILITY.
Return Policy
WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING "PARTS ONLY" OR "NOT IN WORKING CONDITION." THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. IF ITEM IS STATED AS NONREFUNDABLE THAN WE WILL NOT BE RESPONSIBLE FOR SHIPPING COSTS.
ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO OUR TEMECULA CA FACILITY
Additional Information
CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH WITH ANY QUESTIONS, COMMENTS, OR CONCERNS.
BUYERS: CHECK OUR FEEDBACK AND buyWITH CONFIDENCE. if there is a problem with your item PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS.
saleS WITHOUT A buyMAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES.
