Over 90 Total Lots Up For Auction at One Location - WA 04/08

Vivid 7 Problem to start up the aplication

(11)
(2)

Marcio Larrosa

Vivid 7 Problem to start up the aplication

July 29, 2014 10:29

Hi we have a Ge Vivid 7 with bep 2 and fec 1.
When press power on buttom, appear the screen the vivid 7 with the rainbow, but the screen continuosly blink and not go of this page.
I try disconecting the cable of conecting to bep at the fec and have the same problem.
Try disconnecting the internal components assuming it was a problem of drivers (CD Single) and remains the same.
My email is marcio.larrosa@gmail.com
Very thanks for your help

1 person liked this
Log inor Register

to rate and post a comment

(378)
(61)
(13)

Ricardo A. Sanchez

re: Vivid 7 Problem to start up the aplication

July 30, 2014 09:27

Can you please send me a video or pictures to ricardo@ultrasolutions.com

Log inor Register

to rate and post a comment

(368)
(109)
(2)

Marcelo Antonio Correa

re: Vivid 7 Problem to start up the aplication

July 30, 2014 09:27

Hi, Marcio!

I suggest you placing its original HDD appart and make a fresh System installation onto a blank (or used and good one) HDD.

This might help you figuring out if it's a SW or HW issue.

If you disconnect the cable you mentioned (SCSI between FEC and PC2IP)you, probably, could cause a false negative, because the effect would be similar you have already noticed.

Hope this is useful, take care, God Bless.

Kind regards,

MAC.

1 person liked this
Log inor Register

to rate and post a comment

(11)
(2)

Marcio Larrosa

re: re: Vivid 7 Problem to start up the aplication

July 30, 2014 01:39

Hi, thanks for your response, i try reloding the software but have the same result.You can give me more information about the false negative problem. My email is marcio.larrosa@gmail.com

Log inor Register

to rate and post a comment

(17)
(1)

fat_sheep

re: re: Vivid 7 Problem to start up the aplication

May 29, 2016 03:03

Good Day:

Vivid 7, Win XP
System SW BEP4 ver. 2.0.6
Application SW ver. 6.1.1


I have a question concerning my Vivid 7 Win XP machine. Excuse my newbie questioning.

1. Does any of the Vivid 7 comes with embedded Win XP installation and thus would have HDD ? And, based on my info. would it come with it.

2. What exactly is the installation procedure for this machine using my System SW BEP4?

3. Why & When would you use the license key or when is it requested ?

p.s.
*** my email: nshepherd123@gmail.com

Log inor Register

to rate and post a comment

(19)
(4)

walter molina

re: Vivid 7 Problem to start up the aplication

July 30, 2014 09:29

May by you need réload software

Log inor Register

to rate and post a comment

(50)
(5)

ricardo Usandivaras

re: Vivid 7 Problem to start up the aplication

July 31, 2014 08:49

Hi
I did have the same problem ,i change the Power suplier that is in the left side of the eco,for one Pc Power supplier 500 w,and copy the jumper of the original one,i recibed the instructions of autorized service and the eco is working today

Log inor Register

to rate and post a comment

(50)
(5)

ricardo Usandivaras

re: Vivid 7 Problem to start up the aplication

July 31, 2014 08:49

Hi
I did have the same problem ,i change the Power suplier that is in the left side of the eco,for one Pc Power supplier 500 w,and copy the jumper of the original one,i recibed the instructions of autorized service and the eco is working today

Log inor Register

to rate and post a comment

(11)
(2)

Marcio Larrosa

re: re: Vivid 7 Problem to start up the aplication

July 31, 2014 04:06

Hi Ricardo for your response, you can send me more details about the change in the bep

Log inor Register

to rate and post a comment

(50)
(5)

ricardo Usandivaras

re: Vivid 7 Problem to start up the aplication

August 04, 2014 08:53

Marcio
I will try to found the mails sended to me with the instructions to fix the problem if you speak spanish is beter,and send me a mail to rlusandivaras@gmail.com.
Best regards
Ricardo

1 person liked this
Log inor Register

to rate and post a comment

(11)
(2)

Marcio Larrosa

re: re: Vivid 7 Problem to start up the aplication

August 06, 2014 08:10

Ok I will wait your response thanks

Log inor Register

to rate and post a comment

(11)
(2)

Marcio Larrosa

re: re: Vivid 7 Problem to start up the aplication

August 06, 2014 08:10

With regard to the problems of vivid 7 wanted to inform progress.
Proceeded to remove all PCI cards located inside the boot and application boe but in demo mode, attached picture.
Proceeded to insert into the slot 5 PC2Ip card and the screen came back to restart.
Change Position to slot 6 card and the PC2ip device up again in demo mode without flash the screen.
You could tell me if changing from Slot PCI Slot 5 and slot 6 can cause problems of recognition?

Log inor Register

to rate and post a comment

(11)
(2)

Marcio Larrosa

re: Vivid 7 Problem to start up the aplication

August 06, 2014 08:10

With regard to the problems of vivid 7 wanted to inform progress.
Proceeded to remove all PCI cards located inside the boot and application boe but in demo mode, attached picture.
Proceeded to insert into the slot 5 PC2Ip card and the screen came back to restart.
Change Position to slot 6 card and the PC2ip team up again in demo mode without flash.
You could tell me if changing from Slot PCI Slot 5 and slot 6 can cause problems of recognition?
Thanks

1 person liked this
Log inor Register

to rate and post a comment

stats
DOTmed text ad

New Fully Configured 80-slice CT in 2 weeks with Software Upgrades for Life

For those who need to move fast and expand clinical capabilities -- and would love new equipment -- the uCT 550 Advance offers a new fully configured 80-slice CT in up to 2 weeks with routine maintenance and parts and Software Upgrades for Life™ included.

stats
advertisement

Upcoming Auction Events

NorthWest Supply
TIMED
Apr 08, 2024 (99 lots)